CubeSatShop.com   |   isispace.nl   |   isilaunch.com
The one-stop-shop for all your CubeSat and nanosat systems...

CubeSatShop.com is an ISIS initiative
Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.
Q6 Processor BoardIntegration Jig Set for a 1-Unit CubeSat

3-Unit CubeSat Deployer
View Full-Size Image


3-Unit CubeSat Deployer

Price: Call for Pricing

Ask a question about this product

Overview

The ISIPOD is developed within the scope of ISIS’ Launch Services as a lightweight European Launch Adapter for very small satellites in the range of pico- and nanosatellites as an answer to the launch demand from these satellite developers. The system can be acquired together with an ISILaunch, but the system is also sold separately

 


Features

  • The ISIPOD is available in 1U, 2U, 3U and custom versions (e.g. 4U*, 5U* or additions such as a ½U).
    * the 3U is the largest version currently available off-the-shelf, however larger units are expected to follow soon.
  • The triple unit (3U) ISIPOD can be used for both dedicated 3U CubeSat launches and for shared CubeSat launches consisting of a combination of smaller-sized CubeSats (e.g. 2 x 1.5U, or 1U+2U, or 3x1U)

  • Access Panel:
    • One side of the ISIPOD allows for access to the integrated CubeSat. This is the side that is used for mounting the ISIPOD, and can be removed entirely. This means that the entire area between the guiderails over the entire CubeSat length can be accessed.
  • The ISIPOD inner additional envelope is 10.0 [mm] which allows for CubeSats to extend in lateral directions up to 9.0 [mm]+
    +
    Compared to 6,5 [mm] of the CalPoly CubeSat interface standard.
  • The ISIPOD does not rely on a battery pack, nor does the ISIPOD need power to stay closed. Therefore charging of the ISIPOD is not necessary.

  • The Status System relies on redundant implemented deployment status switches.

  • The ISIPOD is compatible with most launch vehicle pyro pulse signals to operate its electrical actuator. This is a non-explosive device which is testable, resetable and reusable without refurbishments.

Performance

  • Release System operating values:
    • Typical Actuation Voltage = 28 [V]       (Range ± 4[V])
    • Typical Current Consumption = 1.75 [A]
    • Typical Pulse Duration = 250 [ms]
  • Thermal range:
    • Tsurvive_min: - 50 [°C]
    • Toperation_min: - 30 [°C]
    • Toperation_max: + 80 [°C]
    • Tsurvive_max: + 90 [°C]
  • Qualification Levels:
    • Quasi Static Load = 15.0 [g]
    • Sine Vibration = 4.0 [g] 10 [Hz] to 100 [Hz]
    • Random Vibration = 14.1 [grms] @ 3 sigma
    • Shock Load = 1.000 [g]; 1 [kHz] to 10 [kHz]
    • Fn greater than 90 [Hz]
  • Flight Heritage since 2013 on PSLV, Antares, Soyuz, Dnepr ...


Product Properties

  • Mass ISIPOD: 2.0 [kg]
  • Nominal Payload Mass: 3.0 [kg]
  • Maximum Payload Mass: 6.0 [kg] (=200%)
  • Outside envelope: 3U ISIPOD: 414.1 x 130.3 x 180.8 mm
  • Inner Envelope (CubeSat envelope) : 100 x 100 x 340.5 [mm]
  • Connectors (on ISIPOD):
    • Release System: Male DSUB9 Connector
    • Status System: Female DSUB9 Connector

Available Documentation


Availability

Usually ships in:

pleasecall.png